WhatsApp：+86 19066591275
Call us 24/7+86 19066591275
Call us 24/7+86 19066591275

News

Home / News (Page 25)
2024-12-24 BY
IN Company News

SHINKAWA VM-5N SST-2194-001-P001G Monitor

SHINKAWA VM-5N SST-2194-001-P001G Monitor

Product manual:

Main features:
High precision monitoring:
This monitor provides accurate data acquisition and analysis, and can monitor the vibration of equipment in real time
Key parameters such as temperature and pressure ensure that the operating status of the equipment is accurately reflected.
Real time alarm function:
When abnormal parameters are detected (such as excessive vibration or high temperature),
The monitor will trigger an alarm to remind the operator to carry out timely maintenance or shutdown to prevent equipment damage.
Powerful data analysis capabilities:
Equipped with powerful data processing and analysis capabilities,
Assist users in real-time assessment of device health status, providing strong support for fault prevention and maintenance.
Strong anti-interference ability:
Maintain stable operation in high noise or complex industrial environments,
Ensure the accuracy and reliability of monitoring data.
Multiple output and interface options:
Provide multiple data output methods, support integration with other monitoring and automation systems, facilitate device management and data synchronization.
Compact and durable design:
Compact design, suitable for installation in industrial settings with limited space or complex environments,
And it has high durability, suitable for harsh environments such as high temperature and humidity.
Application areas:
Industrial equipment monitoring: widely used for monitoring key equipment such as generator sets, motors, pumps, fans, etc.
Automated production line: Real time monitoring of equipment status in the automated production line to ensure the stability of the production process.
Mining and Petrochemical: Suitable for monitoring equipment in mines, oil drilling platforms, etc., to detect equipment abnormalities in advance.
Energy management: Monitor equipment operating status and optimize energy efficiency in energy management and distribution systems.

Product details picture:

SHINKAWA VM-5Z1 POWER SUPPLY UNIT – Advanced Industrial Power Solution
2024-12-24 BY
IN Company News

SHINKAWA VM-5H3 VM-5P3 VM-5Z4 Excitation Controller

SHINKAWA VM-5H3 VM-5P3 VM-5Z4 Excitation Controller

Product manual:

SHINKAWA VM-5H3, VM-5P3, VM-5Z4 excitation controllers are a series of high-performance controllers designed specifically for motor excitation control, mainly used in motor systems such as generator sets and industrial motors. They control the performance of the motor by precisely adjusting the excitation current, providing stable power output and improving the operational efficiency of the motor.
Main features:
Accurate excitation control:
These three excitation controllers can accurately adjust the excitation current of the motor, optimize the output power and stability of the motor.
Stability and reliability:
Designed to provide continuous and stable excitation current control, ensuring the stability of the motor during long-term operation and reducing system failures.
Multiple protection functions:
It includes protection mechanisms such as overcurrent, overvoltage, and overtemperature, which can effectively prevent motor damage caused by abnormal situations.
Efficient Energy Management:
Optimize energy utilization, reduce motor energy consumption, and improve overall system efficiency.
Adapt to a wide range of application scenarios:
Suitable for various industrial applications such as generators, wind turbines, and electric motors.
Strong compatibility:
Compatible with multiple motor drive systems and control systems, easy to integrate with existing equipment.
Compact design:
The compact structure and design make installation and maintenance easier.
Application areas:
Generator set: By adjusting the excitation current, ensure stable output of the generator.
Electric motor control system: widely used in industrial motors, wind turbines, synchronous motors and other fields.
Automation and Energy Management: Used in energy management systems to optimize the operational efficiency of motors and reduce energy consumption.

Product details picture:

SHINKAWA VM-5H3/VM-5Z/VM-5K Power Supply Monitor Rack – Precision Control & Monitoring Solution
2024-12-24 BY
IN Company News

SHINKAWA VM-5C SST-2194-001-P001G Dual Vibration Monitor Module

SHINKAWA VM-5C SST-2194-001-P001G Dual Vibration Monitor Module

Product manual:

SHINKAWA VM-5C SST-2194-001-P001G Dual Vibration Monitor Module is a high-precision vibration monitoring module mainly used for real-time monitoring of the vibration status of industrial equipment, helping users to detect equipment abnormalities in a timely manner and prevent faults from occurring.
Main features:
Dual channel monitoring: supports simultaneous monitoring of two vibration signals, suitable for multi-point monitoring needs.
High precision analysis: Accurately collect and analyze vibration data, and promptly identify anomalies.
Real time alarm: Provides over limit alarm function to ensure timely detection of problems.
Anti interference capability: Maintain stable operation in noisy environments.
High reliability: Adapt to harsh industrial environments and ensure stable operation of equipment.
Application areas:
Vibration monitoring of industrial equipment such as generators, pumps, fans, etc.
Automated production line: Ensure smooth operation of equipment.
Mining and Chemical Industry: Monitor the status of key equipment to avoid malfunctions.
Summary:
The SHINKAWA VM-5C dual vibration monitor module provides an efficient vibration monitoring solution, enhancing the safety and reliability of equipment, and is widely used in industrial automation and equipment maintenance.

Product details picture:

Shinkawa VM-5H3 Built-in VM-5Z Power Supply Monitor Rack – Comprehensive Monitoring for Industrial Control Systems
2024-12-24 BY
IN Company News

SHINKAWA MP-2W2 Redundant Servo System

SHINKAWA MP-2W2 Redundant Servo System

Product manual:

Main features:
Redundant design:
The system adopts a redundant design to ensure that in the event of a critical component failure,
The backup system can seamlessly take over, ensuring the continuous operation of the control system,
Reduce downtime and system failure risk.
High precision servo control:
Provide high-precision servo control that can accurately adjust motor motion,
Ensure stability under high-speed and high load conditions.
Quick response capability:
Capable of fast dynamic response and real-time adjustment of motor control parameters,
Adapt to load changes and operating conditions to ensure precise operation of the equipment.
Multiple protection functions:
Equipped with multiple protection functions such as overload, overvoltage, and overheating,
Take timely measures to protect the safety of the servo system and motor in case of system abnormalities.
Highly integrated and compatible:
Support integration with other control systems and devices, compatible with multiple communication protocols
(such as EtherCAT, Modbus, etc.), easy to use in conjunction with existing automation systems.
High reliability and stability:
Using high-quality control components and redundant design,
Ensure long-term stable operation of the system in harsh industrial environments, adapting to complex working environments such as high temperatures and vibrations.
Real time monitoring and diagnosis:
Provide real-time monitoring and diagnostic functions,
Assist users in timely understanding the system’s operating status and troubleshooting to improve maintenance efficiency.
Application areas:
Industrial robots: Provide precise motion control in industrial robots to ensure precise movements of the robotic arm.
Automated production line: In automated production lines, redundant servo control is provided to ensure efficient and stable operation of the production line.
Precision manufacturing: suitable for manufacturing equipment that requires high-precision motion control, such as CNC machine tools, laser cutting machines, etc.
Aerospace and military: In fields that require extremely high reliability,
Provide redundant servo control to ensure the stability of the system during critical tasks.

Product details picture:

Shinkawa VM-5H3 Built-in VM-5Z Power Supply Monitor Rack – Comprehensive Monitoring for Industrial Control Systems
2024-12-24 BY
IN Company News

SHINKAWA MP-2S excitation controller

SHINKAWA MP-2S excitation controller

Product manual:

Main features:
Accurate excitation current control:
By adjusting the excitation current, the speed and output characteristics of the motor can be precisely controlled to improve its performance and operational efficiency.
High stability:
Adopting advanced control algorithms can effectively reduce fluctuations during motor operation, improve system stability and response speed.
Real time monitoring and feedback:
Provide real-time feedback function, monitor the status of motor excitation current, and automatically adjust control parameters as needed to ensure that the motor operates at its optimal working state.
Multiple protection functions:
Equipped with protection functions such as overvoltage, overcurrent, and overtemperature to prevent damage to the motor system due to faults or abnormal situations.
Strong compatibility:
Supports excitation control for multiple types of motors, compatible with multiple motor drive systems, and easy to integrate with existing equipment.
Compact design:
The compact structural design makes it easy to install and integrate into various industrial equipment, occupying less space and reducing installation complexity.
Energy saving and efficiency:
Efficient excitation control technology can optimize the operational efficiency of motors, reduce energy consumption, and improve overall system performance.
Application areas:
Generator set: Used in the generator control system to regulate the excitation current and ensure stable output of the generator.
Electric motor drive system: used for precise control of electric motors, improving the efficiency and performance of the drive system.
Industrial automation: In various automation equipment, optimizing motor performance and improving production efficiency by controlling excitation current.
Energy management system: used to control motors in the power system, reduce energy waste, and improve energy utilization efficiency.

Product details picture:

SHINKAWA VM-5Y1-02: VM-5 Series Monitor, Advanced Industrial Display
2024-12-24 BY
IN Company News

SHINKAWA VM-5K SST-2194-001-P001G Redundant Servo System

SHINKAWA VM-5K SST-2194-001-P001G Redundant Servo System

Product manual:

SHINKAWA VM-5K SST-2194-001-P001G redundant servo system is an industrial servo system used for high-precision control and operation,
Mainly used in robots, automated production lines, and other precision mechanical equipment.
This system provides higher reliability and stability through redundant design,
Ensure that the device can continue to operate in the event of a malfunction, suitable for application scenarios that require extremely high reliability.
Main features:
Redundant design:
The system adopts a redundant design to ensure that in the event of a main system failure, the backup system can quickly take over, ensuring continuous operation and reducing downtime.
High precision control:
Providing precise servo control enables high-precision mechanical motion control, ensuring the system maintains stability and accuracy under various working conditions.
High reliability:
By using redundant servo motors, controllers, and other key components, the reliability and durability of the system are improved to adapt to harsh industrial environments.
Multiple communication interfaces:
Supports multiple industrial communication protocols, such as EtherCAT, CANopen, etc., facilitating data exchange and system integration with other devices.
Real time feedback:
Provide real-time feedback and monitoring functions, which can adjust and optimize parameters during system operation to ensure optimal control performance.
High dynamic response:
Having fast dynamic response capability, able to adapt to rapidly changing loads and speed requirements, and meet high dynamic control requirements.
Compact design:
The compact design facilitates integration into various industrial systems, saving space and reducing installation complexity.
Application areas:
Industrial robots: Provide precise servo control to ensure the flexibility and accuracy of robot movements.
Automated production line: Ensure high-speed and high-precision operation of equipment in automated production equipment.
Precision manufacturing: used in manufacturing equipment that requires high precision to ensure machining accuracy and efficiency.
Aerospace and automotive: suitable for fields that require high reliability and precise control, such as aerospace testing, automotive assembly, etc.

Product details picture:

JL VM-5K/SST-2194-001-P001E – Advanced Automation Module, Precision Designed for Industry 4.0 Applications
2024-12-24 BY
IN Company News

POWEC-PMP10 Pneumatic Power Module

POWEC-PMP10 Pneumatic Power Module

Product manual:

POWEC-PMP10 Pneumatic Power Module is a pneumatic drive module used in industrial automation systems, specifically designed to provide pneumatic energy and drive mechanical devices. This module plays a crucial role in industrial automation and robotics applications, helping to achieve precise mechanical motion control.
Main features:
Pneumatic drive function:
Provide stable pneumatic power to drive pneumatic devices such as pneumatic actuators, robot joints, etc.
Efficient energy conversion:
Efficiently convert electrical energy into pneumatic energy, optimize energy efficiency, and reduce energy consumption.
Multiple protection functions:
Equipped with overload, overvoltage, and overheating protection to ensure safe and stable operation of the system and prevent equipment damage.
Modular design:
Compact and modular design, easy to integrate into various industrial equipment and automation systems, convenient for installation and maintenance.
Strong compatibility:
Adapt to multiple pneumatic system standards and seamlessly integrate with other pneumatic equipment and control modules.
Durable and highly reliable:
Industrial grade design, suitable for harsh environments such as high temperature, humidity, and vibration, ensuring long-term stable operation.
Application areas:
Industrial automation: used to drive pneumatic actuators and robotic arms, enhancing the automation level of production lines.
Robotics technology: providing pneumatic power for industrial robots, supporting precision control and efficient operation.
Pneumatic tool control: provides power support for various pneumatic tools to ensure efficient operation of the tools.

Product details picture:

HIMA PMP10.24SIC Power Supply – High Efficiency Industrial Power Module
2024-12-24 BY
IN Company News

POWEC PCU10 power module

POWEC PCU10 power module

Product manual:

POWEC PCU10 power module is a power module used in industrial automation systems,
Mainly providing stable power support to ensure the stability and reliability of system operation.
This module is widely used in various industrial control systems that require efficient power conversion and stable power supply.
Main features:
Efficient power conversion:
It has efficient power conversion function, which can effectively convert input power into the required output voltage and reduce energy consumption.
Stable output:
Provide stable output voltage to ensure stable operation of the system under different load conditions.
Overload and overvoltage protection:
Equipped with multiple protection functions such as overload, overvoltage, and short circuit, ensuring the safe operation of equipment and systems.
Wide compatibility:
Compatible with multiple input voltage standards, supporting power needs in different regions around the world.
Compact design:
Compact modular design, easy to integrate into various devices and systems, saving space.
Industrial grade durability:
Adapt to harsh industrial environments, possess strong anti-interference ability and high temperature resistance.
Application areas:
Industrial automation control system: provides stable power for control modules, sensors, and other equipment.
Robot control system: provides reliable power support for robots to ensure their precise operation.
Communication equipment: used for power supply in communication infrastructure to ensure continuous operation of equipment.

Product details picture:

Woodhead PCU1000: Industrial Control System, Model Specific, Automation Module
2024-12-24 BY
IN Company News

GE VMIVME7698 Bus Interface Module

GE VMIVME7698 Bus Interface Module

Product manual:

GE VMIVME7698 bus interface module is an interface module used to connect VME bus with other external devices or systems, widely used in industrial automation and control systems.
Main features:
Multiple bus compatibility: Supports interfaces between VME and PCI, Ethernet, RS-232, and other buses, facilitating system integration.
High speed data transmission: Provides efficient data exchange, suitable for real-time control and low latency applications.
Modular design: easy to expand and integrate, supporting interoperability between different systems.
Industrial grade reliability: capable of stable operation in harsh environments and strong anti-interference ability.
Application areas:
Industrial automation: achieving communication between different automation equipment.
Testing and Measurement: A testing system with multiple device connections.
Process control: real-time data transmission and system integration.
Summary:
GE VMIVME7698 is an efficient and reliable bus interface module suitable for industrial automation, process control, and testing fields.

Product details picture:

GE IS215UCVEM09A VMIVME-7698 – High-Performance Industrial Controller
2024-12-24 BY
IN Company News

GE VMIVME-5576 Fiber Reflective Memory

GE VMIVME-5576 Fiber Reflective Memory

Product manual:

GE VMIVME-5576 Fiber Reflective Memory
It is a storage module designed specifically for high-performance data storage and fast data transmission,
Mainly used in industrial automation systems.
This module achieves high-speed data access through fiber optic communication,
Widely used in fields such as real-time data processing, process control, and testing and measurement.
The following are its main features and functions:
Main features:
Fiber optic communication support:
Using fiber optic connection technology to provide high-speed and long-distance data transmission,
Reduce electrical interference to ensure the stability and reliability of data transmission.
High speed storage and access:
Supports high-speed data access and can quickly read and write large capacity data,
Suitable for real-time data processing and large data transmission applications.
Large capacity storage:
Provide a large storage capacity that can handle large amounts of data,
Suitable for systems that require long-term storage and fast access.
Redundant design:
Support data redundancy and fault tolerance functions to ensure the security and reliability of data in stored procedures, suitable for industrial applications with high reliability requirements.
Modularity and compatibility:
Compatible with VME bus architecture, easy to integrate into other VME systems,
Support the use in conjunction with various industrial control systems.
Adapt to harsh environments:
Designed to adapt to industrial environments, capable of long-term stable operation under harsh conditions such as high temperature, humidity, and vibration.
Application areas:
Industrial automation: used for high-speed, real-time data storage and processing,
Especially in control systems that require large capacity storage and high-speed access.
Process control: Real time data recording and storage in process monitoring in industries such as chemical and power.
Testing and Measurement: Used for collecting and storing large amounts of data in testing systems.
Real time control system: supports high-speed data exchange and fast access, suitable for real-time control systems such as robot control and CNC machine tools.

Product details picture:

GE-FANUC / Vmivme 5588 High-Speed Reflective Memory

Menu
Call us 24/7+86 19066591275

Search for products

Back to Top
Product has been added to your cart
phone: +86 19066591275
to whats
+8619066591275
email: abbdcs36@gmail.com